How to Develop a Bootable USB Drive

A bootable USB flash drive is normally useful for booting into Windows. In addition, it allows you diagnose hardware issues and can be used to set up Windows on your computer. This spares you from the hassle of buying Windows Installation CD and then waiting for hours to set up Windows on your computer. However, to enjoy these benefits, you need to produce a bootable USB flash drive.

Step-by-step Guide to Developing a Bootable USB Drive

Here is an easy step by step guide to help you develop a bootable USB key drive:

1. First things first- In the first place this process, first you have to find out whether or not the computer you need to use your bootable USB drive has the capacity for booting to a USB drive. Should you have an old system, it could probably not have this feature. The most recent computers built since Windows Vista was released are basically capable of booting to a USB device.

2. Nonetheless, to determine whether your PC is capable for booting to a USB device, access your system’s BIOs.

3. There are numerous methods to enter the BIO’s of the systems. The ways to enter the bios vary from system to system and BIOs manufacturers. Nonetheless if you computer was manufactured in the last few years it will let you enter the BIOs by pressing any one of the five keys: F1, F2, DEL, ESC or F10. However, if your PC is old before 1995, you can test hitting these keys to enter the BIOs create: CTRL+ALT+ESC, CTRL+ALT+ENTER or Page up and Page down.

4. As soon as you successfully enter the BIOs of one’s computer, you will see a blue screen. Check the bootable device list. If photo stick is listed, simply move your USB drive on the top most position to make it your first boot device.

5. To create bootable USB drive for Windows 7 or 8, be sure you have Windows 7 or 8 installed on your pc.

6. Also, make sure you have a flash drive of at the very least 4 gigabytes. This is had a need to store all of the necessary files.

7. Now plug the USB drive and create a backup of the files, if any, you have stored in your USB drive. This is important because the drive will undoubtedly be formatted when you are undertaking the booting process. This implies the files you have stored in your USB drive will undoubtedly be deleted. Therefore, it really is advised to create a backup to avoid the increased loss of your important files.

8. As soon as you create backup of the files, now click start and in the search box type ‘cmd’ to open an elevated windows command line. After typing the ‘cmd’ command Press CTRL+Shift+Enter. Another solution to open elevated windows command line is to click on start menu, head to all program, accessories and then right go through the command prompt menu item. After clicking select Run as Administrator.

9. Simply typecd c:windowssystem32. This will change the directory to the Windows system 32 directory.

10. Now to get to the next step of fabricating a bootable USB drive, type DISKPART and press enter. Then again type LIST DISK and press enter. The DISKPART command is actually a recovery console command. This permits you, the user, to delete and create partitions on your pc without any hassle.

Leave a Reply